Cisco Optical Gigabit Ethernet Switch WS-C3850-24P-S
QUICK OVERVIEW
· Cisco Catalyst 3850-24 Switch
· 24 x 10/100/1000 (PoE+) Ports
· Layer 3
· Stackable
· 715W AC Power With 415W AC POE
· IP Base
· Managed
Clean Serial Number WS-C3850-24P-S Cisco Stackable With 24 POE Ports IP Services Switches
The Cisco Catalyst 3850 Series provides capabilities that ideally suited to support the convergence of wired and wireless access.
The new Cisco Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the
switch and enables uniform wired-wireless policy enforcement, application visibility, flexibility, and application
optimization.
This convergence is built on the resilience of the new and improved Cisco StackWise®-480 technology.
| Product Code | WS-C3850-24P-S |
| Description | Cisco Catalyst 3850 24 Port PoE IP Base |
| Enclosure Type | 1 RU |
| Network SFP uplink module selection | C3850-NM-4-1G,C3850-NM-2-10G, |
| Ports | 24 x 10/100/1000 WITH POE |
| Available POE Power | 435W |
| Stack bandwidth | 480 Gbps |
| Forwarding Performance | 68.4 Mpps |
| Switching Capacity | 92 Gbps |
| RAM | 4 G |
| Flash Memory | 2 G |
| Dimensions | 44.5 cm x 48.8 cm x 4.45 cm |
| Package Weight | 17.49 Kg |
Note:
| 1 | Mode button | 4 | USB Type A storage port |
| 2 | Status LEDs | 5 | 24x10/100/1000 Ethernet POE ports |
| 3 | USB mini-Type B (console) port | 6 | Network SFP uplink module slot |
The status LEDs include STAT (status), DUPLX (duplex), SPEED, STACK, SYST (system), ACTV (active) XPS
(expandable power system) and S-PWR (Stack Power).
The switch supports one hot-swappable network module that provides uplink ports to connect to other
devices. The switch should only be operated with either a network module or a blank module installed.
Note:
| 1 | Ground connector | 5 | Power supply modules |
| 2 | CONSOLE (RJ-45 console port) | 6 | Fan modules |
| 3 | StackWise port connectors | 7 | MGMT port |
| 4 | StackPower connectors | 8 | Reset Button |
Below shows the StackWise-480 and StackPower connectors.
For the stacking purpose, LAN base switches can only stack with other Catalyst 3850 Series LAN base,
mix stack with IP base or IP service feature set is not supported.
The Accessories
Table shows some accessories of the WS-C3850-24P-S.
| Models | Description |
| C3850-NM-4-1G | Cisco 3850 Series 4 x 1GE Network Module |
| C3850-NM-2-10G | Cisco 3850 Series 2 x 10GE Network Module |
| C3850-NM-BLANK | Cisco 3850 Series Blank Network Module |
| L-C3850-24-S-E | C3850-24 LAN Base to IP Services Electronic RTU License |
| PWR-C1-350WAC | Cisco 3850 Series Power Supply 350W AC |
| PWR-C1-350WAC/2 | Cisco 3850 Series Secondary Power Supply 350W AC Config 1 Secondary Power Supply |
| STACK-T1-50CM= | Cisco StackWise-480 50cm stacking cable for Cisco Catalyst 3850 series switch |
| STACK-T1-1M= | Cisco StackWise-480 1m stacking cable for Cisco Catalyst 3850 series switch |
Product Tags:
|
|
Cisco Catalyst Gigabit Network Switch 24 X 10 / 100 / 1000 POE+ Ports WS-C3850-24P-S Images
|
